SC 1200
An innovative material to replace asbestos based seals and conventional PTFE products
Features
- Superior chemical resistance
- Excellent resistance to deformation
- No ageing
- High compressibility
- High sealability
- No water absorption
- Non-flammable
- Easy maintenance (assembling/disassembling)
- Complies with FDA specifications
21 CFR 177.1550
21 CFR 175.300
Complies with REG. EU 10/2011
In compliance with TA-Luft VDI 2240
Uses Chemical and Petrochemical Industry
- Heat exchangers
- Piping
- Flanged fittings
- Valves
- Pumps
- Flat seals
- Centrifuges
| Property | Unit | Mehod | Value |
| Pressure, max | bar | / | 80 |
| Temperature, min | °C | / | -200 |
| Temperature, max | °C | / | +260 |
| P x T, max | bar x °C | / | 12.000 |
| Density | g/cm3 | ASTM D792 | 2,24 |
| Compression Modulus Room Temperature - 20 Mpa KSW | % | DIN 28090-2 | 7 |
| Creep Relaxation Roome Temperature - 1 Mpa KRW | % | DIN 28090-2 | 3 |
| Compression Modulus 150°C - 20 Mpa - 16 hours WSW | % | DIN 28090-2 | 37 |
| Creep Relaxation 150°C - 1 Mpa - 16 hours WRW | % | DIN 28090-2 | 5 |
| Recovery | mm | DIN 28090-2 | 0,09 |
| Leakage Rate | mg/s/m | DIN 28090-2 | |
| Leakage Rate (with Nitrogen) | cm3 /min | DIN 3535 | 0,01 |
| Compression Creep 150°C - 30 N/mm2 | N/mm2 | DIN 52913 | 16 |
Colour: White - Grey
| Dimensions(mm) | Toll. +20 -0 | |
| Thickness (mm) | Toll. +10% -10% | |
