SC 1600
An innovative material to replace asbestos based seals and conventional PTFE products
Features
- Superior chemical resistance (acids, solvents, refrigerants, water
- Low bolt load
- No ageing
- Excellent compressibility
- Superior sealability
- No water absorption
- Non - flammable
- Easy mainenance (assembling/disassembling)
- Complies with FDA 21 CFR 177.1550
In compliance with TA-Luft VDI 2240
Uses Pharmaceutical Industry
- Piping
- Fittings
- Valves
- Centrifuges
| Property | Unit | Method | Value |
| Pressure, max | bar | / | 60 |
| Temperature, min | °C | / | -200 |
| Temperature, max | °C | / | +260 |
| P x T, max | bar x °C | / | 11.000 |
| Density | g/cm3 | ASTM D792 | 1,60 |
| Compression Modulus Room Temperature - 20 Mpa KSW | % | DIN 28090-2 | 25 |
| Modulo di Compressione 150°C - 20 Mpa - 16 ore WSW | % | DIN 28090-2 | 7 |
| Creep Relaxation Room Temperature - 1 Mpa KRW | % | DIN 28090-2 | 32 |
| Compression Modulus 150°C - 20 Mpa - 16 hours WSW | % | DIN 28090-2 | 5 |
| Recovery | mm | DIN 28090-2 | 0,07 |
| Leakage Rate with nitrogen N2, 40bar, 32 N/mm2 | mg/s/m | DIN 28090-2 | |
| Leakage Rate with nitrogen N2, 40bar, 32 N/mm2 | cm3 /min | DIN 3535 | 0,02 |
| Compression Creep 150°C - 30 N/mm2 | N/mm2 | DIN 52913 | 14 |
Colour: Light Blue
| Dimension (mm) | Toll. +20 -0 | |
| Thickness (mm) | Toll. +10% -10% | |
