Tenfil TF 400

Tenfil TF 400

TENFIL Sealant paste in aqueous dispersion TENFIL TF400 is a PTFE-based thread sealant in water dispersion, which increases the tightness of the threaded parts and prevents leakage of gases. TF400 can be used at temperatures from -45 ° C to + 150 ° C (-49 ° F to + 302 ° F). The product is intended for the assembly of fittings and threaded joints of different kinds of pipes.

SPECIAL PROPERTIES

  • Cold usage.
  • Good resistance to ALCOHLS, ALIPHATIC SOLVENTS, GLYCOLS, OILS, GREASES.
  • Moderate resistance to AROMATIC SOLVENTS, ESTESR, KETONES.
  • UL 1356 approved for use with METHANE, BUTANE, PROPANE, NATURAL GAS (GPL).
TECHNICAL INFORMATION
Properties   Value
  APPEARANCE   Blue paste
  SOLID CONTENT   50 – 55%
  pH   4 – 6
  VISCOSITY   12000 +/- 1000 cP (metodo Brookfield)
  DENSITY   1,07-1,08 gr/cm3 @ 20°C
  SURFACE TENSION   38 dyn/cm
  FLASH POINT   NoT applicable
  BOILING POINT   100°C (212°F)
  STIFFNESS POINT   About 0°C
  COMPOSITION   PTFE-based aqueous dispersion

 

DRYNG TIME
  TEMPERATURE °C   FORCED AIR m3/min   DRYING TIME   END POLYMERIZATION  
  80   9   80 seconds   20 minuts  
  50   9   120 seconds   2 hours  
  20   0   1 hour   12 hours  

 

APPLICATION NOTES
  Measure   Nr. Pz. Per kg
  1/8 “   12500
  1/4 “   7000
  3/8 “   6660
  1/2 “   3350
  3/4 “   2800
  1 “   2500

 

SAFETTY
TENFIL TF400 should be handled like other Lineplus PTFE resin. When PTFE resin are heated to temperatures above 350°C, a small amount of decomposition products, which may be harmful, are given off. Avoid inhalation of these fumes. Ovens and process equipment should be vented and adequate ventilation provided in the working area. For further information refer to the Lineplus PTFE material safety data sheet. STORAGE AND STABILITY
TENFIL TF400 is stable for one year if stored in original unopened container at temperatures between +4°C - +35°C
(39,2°F – 95°F).

PACKAGING
Kg 10 - Wide-mouthed bucket with lid.

NEWS& EVENTS

Thursday, 03 November 2022 08:44

IPC CANADA: THE NEW VENTURE OF GUARNIFLON

IPC Inc. (Industrial Plastics Canada), as part of the Guarniflon Group, leverages more than 70 years of combined experience in producing finished, semi-finished products in PTFE, custom molded rods, tubes, plate sheets, gaskets, and machined components.

Read More
Friday, 14 October 2022 13:18

IZB EXHIBITION – WOLFSBURG - 11/13 OCTOBER 2022

3 days of exhibition in Germany fully focused on the automotive segment.

Read More

347 Moorside Road - Swinton
Manchester M27 9HH - United Kingdom
Phone: +44 (0) 161 793 7628 | Fax: +44 (0) 161 793 7629
www.maceplastuk.com - info@maceplastuk.com

FOLLOW US IN LINKEDIN
FOLLOW US IN YOUTUBE